Sound Transmission Loss

(65) 6747 7234
Account 0

Sound Transmission Loss

Enquiry Item

Conventional measurement procedures for the characterization of sound Transmission Loss (TL) imply practical difficulties and high costs, especially in terms of testing environments. With the use of the PU sensors from Microflown Technologies, an in-situ characterization can be achieved in a matter of minutes by directly measuring the incident and transmitted acoustic fields. Either by scanning or using fixed measurement points, the sound Transmission Loss can be represented using 2D sound visualization tools or traditional spectral representations. The TL calculation sub-module is available for both Scan&Paint 2D and Analyser software.


This product is temporarily out of stock. You may opt-in our waiting list and we'll notify you once the product is restocked.

Product Features


This sound transmission loss measurement procedure is based on regular Scan&Paint 2D tests. All you need to do is to drive a sound source with broadband noise and carry out a scan with a Microflown PU probe over the target areas. Two scans need to be performed: one over the emitter side and the other at the receiver side. The transmission loss software module will merge the two scans, calculate the local sound transmission loss and illustrate via colormaps, potentially revealing acoustic leakage, mounting errors or installation defects. Results are computed by taking the ratio between the spatially averaged sound pressure in the emitting side and the sound intensity in the receiving side. Enabling a truly in-situ method to measure sound transmission loss.

  • One sensor solution
  • In-situ and broadband method
  • Scanning based method
  • Spatial representations and spectral results
  • Characterize multiple partitions through scans
  • Fast methodology
  • Sound leakage and TL results from the same dataset




The flexibility of the Analyser software allows for performing sound Transmission Loss power spectra measurements using one or multiple PU probes. Record and define the project structure while measuring or create a working tree beforehand to follow during a measurement campaign. A chart-based workflow offers intuitive guidance through your measurements. The possibility to create measurement templates speeds up the working procedure and furthermore a robust platform to handle data for repeatable measurement campaigns. Similar to the Scan&Paint 2D TL module, results are calculated by taking the ratio between the spatially averaged sound pressure and sound intensity in the emitting and receiving sides, respectively.

  • One or multiple sensors
  • In-situ and broadband method
  • Scanning and fix point
  • No camera required
  • Spectral quantification
  • Characterize one or multiple partitions
  • Very fast methodology
  • Measurement campaigns can be predefined