Vibration Testing Webinars - m+p International
m+p International will be holding 3 webinars for engineers who want to expand or refresh their knowledge on vibration testing.
Experimental Modal Analysis Webinar
Observe, analyse and document the vibrational behaviour of machines and mechanical structures with Experimental Modal Analysis (EMA). In this webinar we will discuss all that you need to know about EMA, why and how to use it. See agenda below
Why EMA?
Procedure during EMA
Practical demonstration with an impulse hammer
Setting the optimal test parameters
Determination of the modal parameters
Evaluation of the results
Visualization of the results
Date*: March 31, 2021, 3:00 PM - 3:45 PM GMT+08
Register Here
*Note: The webinar has been rescheduled to March 31st
Sine Control Webinar
Sine control is one of the two basic and most common excitation modes for Environmental Shaker testing. This control mode performs real-time closed-loop control of swept sine vibration. In this webinar, we will discuss the applications of sine control in vibration testing, functionality of a controller, other types of sinusoidal excitation and a practical demonstration. See agenda below.
Description of sine
Applications in vibration testing
Functionality of a controller
Practical demonstration:
Test definition
Test run
Test evaluation
Other types of sinusoidal excitation
Date: March 23, 2021, 3:00 PM - 3:45 PM GMT+08
Register Here
Random Vibration Control Webinar
Random vibration control is one of the two basic and most common excitation modes for Environmental Shaker testing. Random performs real-time closed-loop control of PSD profiles. In this webinar, we will discuss the applications of random vibration control, the functionality of a controller, other types of random excitation., and a practical demonstration. See agenda below
Description of random
Applications in vibration testing
The functionality of a controller
Practical demonstration:
Test definition
Test run
Test evaluation
Other types of random excitation
Date: March 30, 2021, 3:00 PM - 3:45 PM GMT+08
Register Here
About m+p International
You know m+p international as a worldwide provider of high-quality test and measurement solutions.
Founded in 1980 as spin-off of the Institute of Technical Mechanics at Leibniz Universität Hannover, Germany, business was first focused on consulting and computational tasks for structural dynamics and applied mechanics.
Today m+p international develops and manufactures test and measurement systems for vibration testing, dynamic signal analysis, data acquisition, process monitoring and test stand engineering. Our state-of-the-art products meet the highest demands on quality and reliability and have a significant market share in numerous key industries worldwide – everywhere where maximum efficiency and shortest time to market are crucial.
By working closely with our customers, we understand their applications from an engineer’s point of view and this is apparent in our products. A policy of continuous research and development, which has led to many pioneering solutions, ensures that our products demonstrate superior performance and quality.
m+p international has its headquarters in Hannover with sales/marketing subsidiaries in New Jersey (USA), England, France and China, along with representatives and agents in around 30 countries.