GRAS 46BC 1/4" CCP Multifield Measurement Microphone Set, High Sensitivity

Account 0

GRAS 46BC 1/4" CCP Multifield Microphone Set, High Sensitivity

Enquiry Item

GRAS 46BC is a true multifield microphone for use in pressure, free-field, or random-incidence environments or any scenarios where the sound field is ill-defined or changing. The design of this microphone takes advantage of the microphone's small dimensions and slightly enhances the high-frequency content, which results in the perfect microphone for in-cabin measurements or any scenarios where measuring in a random incidence environment is needed.

Sound fields have historically been defined in microphone standards as pressure, free field, or random incidence. Multifield microphones can accurately measure in any field or in any combination of the defined fields. 

In all situations, sound fields, and angles of incidence, 46BC is compliant with IEC 61672 Limits.

 

Freq range: 4 Hz to 20 kHz
Dyn range: 25 dB(A) to 145 dB
Sensitivity: 20 mV/Pa


Share

This product is temporarily out of stock. You may opt-in our waiting list and we'll notify you once the product is restocked.

Product Overview

Topbanner-Enola-1814px-bred

Acoustic challenges in a car cabin

The constant evolution of motor vehicles is a never-ending source of new acoustic challenges. The transition from internal combustion engines (ICEs) to electric vehicles (EVs) is a lot more than just swapping power sources.

 

New challenges

Added to the vehicle noise itself come the audio and infotainment system assessment challenges. Efforts to increase efficiency and extend the range between charging go beyond the technological improvements in battery and motor efficiency. Lighter materials are being incorporated into the vehicle structures and interiors. This introduces a range of new challenges for assessing the quality of in-cabin audio:

  • Lighter materials with their own dampening characteristics

  • Highly reflective elements like instrumentation panels, windows, and even panoramic glass that may or may not be exposed on the interior ceiling.

  • The combination of the above.

This results in a combination of sound fields where noise can come to the occupants from multiple angles, with a range of dampening effects for different frequencies. If not evaluated properly, occupants could experience muddled audio for some frequencies or reverberant dissonance for other frequencies.

 

Beyond the capability of traditional testing

The new challenges have pushed audio testing needs beyond the capabilities of ½″ microphones.

 

Can the 46BC match ½″ microphones on the low end?

The noise floor of traditional ¼″ microphones was once a primary limitation for use in automotive NVH testing. However, the 46BC has the lowest noise floor of any ¼″ microphone on the market, making it uniquely suited to replace the ½″ microphones in current use, enabling improved high-frequency accuracy, while maintaining low noise floors.

Product Features

46BC protection grid

Unlike other ¼″ microphones, 46BC is optimized for use with the protection grid. This feature ensures protection during in-cabin measurements.

NOTE: The protection grid creates a resonance that will occur around 35 kHz. This resonance is in the order of magnitude of + 6 dB.

 

Microphone set concept

Data safety is highly important because the costs related to unsuited and unreliable sensors may determine whether your project turns into a success or not.

For users, data safety translates directly into tools that allow for easier microphone selection, simple system configuration, and reduction of measurement errors.

The microphone set concept. It is simple, reliable, and robust and consists of a microphone cartridge and preamplifier combination, which is calibrated as one unit. This eliminates errors because there is only one sensitivity value to account for and the risk of contaminating the interface is eliminated. Combine this with our unique and proven design and you have the most reliable measurement microphone sets available in the industry today.

 

Typical applications and use

The small size and optimized frequency response make 46BC ideally suited for applications where the sound field is ill-defined or changing. This is due to the combination of size and optimization, which reduces the influence of angle of incidence of source positions and reflections.  The result is a reduction in measurement uncertainty in applications such as in-cabin noise, architectural acoustics, and outdoor measurements. GRAS 46BC is also well suited for general acoustic measurements where high sensitivity and low noise are required.

NOTES:

  • To achieve optimal performances 46BC must be powered on for at least two minutes before starting a measurement.

  • Unlike other CCP microphones, a positive pressure on the 46BC diaphragm generates a negative output voltage.

 

Compatibility

To perform as specified, the GRAS 46BC microphone set requires a constant current input module that can deliver 3.5 mA and 24 V unloaded CCP voltage supply. If the constant current supply is lower, the capability of driving long cables is reduced, and consequently, the upper frequency is reduced. If the voltage supply is lower, it will influence the upper dynamic range.

The microphone set is terminated with a 10/32 Microdot female connector. Ready-to-use coax cable assemblies of various types and lengths are available in standard as well as customized lengths.

The 46BC is IEEE 1451.4 TEDS v. 1.0 compliant. If your measurement platform supports Transducer Electronic Data Sheets (TEDS), you will be able to read and write data like properties and calibration data.

 

Quality and warranty

GRAS microphone sets are made of components from our proven standard portfolio and are all manufactured of high-quality material and branded parts that were chosen and processed to ensure life-long stability and robustness.

All parts are manufactured and assembled at the factory in Denmark by skilled and dedicated operators in a verified clean-room environment. The microphone diaphragm, body and unique protection grid are made of high-grade stainless steel and make the microphone set resistant to physical damage as well as corrosion caused by aggressive air or gasses.

This, together with the enforced gold-plated microphone terminal, guarantees a highly reliable connection. Thanks to the high quality, our warranty against defective materials and workmanship is five years.

Product Benefits

Benefits of 46BC at a glance:

  • Only multifield microphone on the market.

  • Lowest ¼″ noise floor.

  • Reduced influence of the angle of incidence.

  • Meets the requirements of the AES Acoustics Measurements recommendation.

  • Well-suited for high-frequency measurements.

  • Minimal footprint for easy placement.

  • Reduced influence on measurement environment due to their small size.

 

Why is a ¼″ microphone better?

The actual physical size of ¼″ microphones provides many benefits for in-cabin acoustic testing. The size-related properties (blog post) reduce the pressure build-up effect on the diaphragm and minimizes error when measuring in a non-free-field environment, such as in-cabin. This enables improved accuracy at higher-frequency ranges. And when accounting for real-world conditions and measuring where there are many reflections and disturbances, such as in-cabin, the physical advantages of a ¼″ microphone can greatly increase accuracy and simplify post-processing data

 

The cabin is a complex sound field, consisting of multiple source contributions that can change due to factors that depend on velocity, such as road noise, wind noise, braking noise, etc. This environment is a prime example of a multifield environment, and it can only be measured accurately with ¼″ or smaller microphones.

 

According to the Acoustic Engineer Society (AES) In-car Acoustics Measurements recommendation, microphones that match the characteristics of 46BL-1 and the 46BC are ideally suited for these types of measurements.